稱重變送器AT-08
介紹
本稱重變送器是由意大利Pavone Sistemi SRL公司生產(chǎn),原裝進口,是典行的模擬稱重變送器。該模擬稱重變送器把稱重傳感器輸入的信號放大為標準的電壓0-10V或電流0/4-20mV進行輸出。
產(chǎn)品特點:
1. 電 源:24Vdc±15%
2. 模擬輸出:0-10Vdc,0-20mA或4-20Ma
3. 標 定:用微調(diào)電阻進行零點和滿刻度標定。
4. 濾 波:本稱重變送器帶有可調(diào)模擬濾波器。
5. 安 裝:為DIN導軌安裝型稱重變送器
6. 認 證:CE認證
7. 可選電源:12Vdc±15%(模擬輸出可選0-5Vdc)
可選電源:115/230Vac 50/60 Hz
TECHNICAL CHARACTERISTICS AT08
Input range: 24 Vac/Vdc ±15%
Trasducer input voltage: 10 Vac/120 mA (max 4 beam load by 350 Ohm)
Max power: 5 W
Analog output: 0÷10 Vdc bipolar, 0÷20 mA or 4÷20 mA
Maximum input signal: between 10 mV, 20 mV and 30 mV
Linearity: ±0.02% FS
Temperature range: -10 ÷ +50°C
Storage temperature: -20 ÷ +70°C
Temperature drift: 0.005% FS/°C
Calibration: 20 spin by trimmer (-8% ÷ +3% F.S.)
Full scale calibration (FS): 20 spin by trimmer (±5% FS)
Analogic filter: Adjustable by single turn trimmer 270 °C
Rensponse time: 5÷250 ms. (fixed to 5 ms on output mA)
Mounting: DIN guide
Dimensions: 78 x 92 x 52 mm
Connection: Terminal screw pass 5.08 mm
Number of connected beam load: max of 4 beam load
Certifications: EN50082-2, EN55011, EN61000
Options: Excitation 115 or 230 Vac 50/60 Hz (for DIN guide) Excitation
12Vdc ± 15% (bipolar output 0÷5 Vcc) analogic filter with response
time 0,5÷25 ms |